--New more portable and affordable family of tube amps from Line 6
and tube-amp legend Reinhold Bogner combine reconfigurable analog
components and HD modeling technology to deliver boutique tone, feel and
touch response, and multiple amplifier voicings--
ANAHEIM, Calif. – January 19, 2012 – Line 6 (room 212A/B) is showing
the DT25 family of amplifiers at Winter NAMM 2012. The portable, new
25W/10W tube amps, which include DT25 112 Combo, DT25 Head, and DT25 112
Extension Cab, deliver boutique sound and performance via a uniquely
versatile design by renowned amp designer Reinhold Bogner and advanced
HD modeling technology from Line 6.
“DT25 is like four boutique tube amps in one,” remarked Elliot
Chenault, Line 6 Product Manager. “Bogner’s innovative design applies
reconfigurable analog components to provide incredible sonic flexibility
and the rich tone, feel and touch response his amps are known for.”
The new amplifiers provide guitarists with four guitar amp voicings,
or sonic signatures: American clean, British crunch, Class A chime and
modern high-gain. Each voicing is the perfect combination of negative
feedback loop topology and HD preamp and tone stack modeling. Add to
that the reconfigurable operating class (Class AB/25 Watts/Fixed Bias or
Class A/10 Watts/Cathode Biased) and power tube mode (Pentode or
Triode) and guitarists can dial in classic vintage tones or highly
customized originals of their own creation.
The simple, two-channel design provides uncommon flexibility. Each
channel is independent – not “clean” or “dirty” – and any configuration
of voicing, operating class and power tube mode can be dialed in to
either channel. A flick of the A/B switch (or a tap of a latching
footswitch) is capable of causing a full analog and digital
transformation.
DT25 amplifiers feature L6 LINK™ jacks for connection to new Line 6
POD® HD multi-effect processors. When connected, the POD HD adds
effects, additional amp voicings, foot control and instant scalability
(including stereo operation with multiple DT25 amplifiers). The
amplifiers’ back panels also feature MIDI I/O, a serial effect loop,
multiple speaker outs and a direct out with cabinet simulation, which
provides the rich DT25 tone without having to mic the speaker.
DT25 amplifiers feature one 12AX7 and two EL84 tubes, custom-voiced
Celestion® G12H90 speakers, and modeled spring reverb with individual
level control per channel.
For more information, please visit http://line6.com/dt25
©2009 - 2010 Fred Russell Publishing, All Rights Reserved. This article can not be used without permission from the Author. To Contact the Author email curt@RockHouseMethod.com
No comments:
Post a Comment